This product consists of alkyd resins, modified resins, composite oxide red rust agents and additives made of one-component quick-drying anti-rust primer with good rust resistance. Key Features:? Iron oxide red and rust paint a rust inhibitor compound, it has good rust resistance. ? Has good water resistance and salt water. ? Has good adhesion and mechanical properties. ? Dry fast, good construction performance, and a variety of supporting the use of surface. Uses: used in steel, textile machinery, engineering machinery, pipe surface coating. Color and Appearance: iron red, matte basic parameters: proportion: 1. 45kg / L dry film thickness: 60um wet film thickness: 100um Theoretical amount: 145 9 / m 2 Flash point: 29 ℃ Drying time: (25 ℃) table Dry ≤2h hard work ≤24h Suggested painting number: Suggested painting two. Front-matching paint: direct painting in rust on the steel surface quality to meet Sa2.5 level. After matching paint: all kinds of alkyd MIO antirust paint, alkyd, phenolic, chlorinated rubber, epoxy, and polyurethane. Surface treatment:? Primed surface must be dry, except for the net all the oil, debris, no moisture condensation on film. ? Oxide steel sandblasted to Sa2.5 level. ? And you can match the old film: In addition to the net all the oil debris. Substrate temperature: substrate temperature above the dew point 3 ℃. Coating Application:? Mixing: The product-component cans, must stir the use of all hook, available X-6 alkyd thinner to adjust the viscosity. ? Airless spray: Dilute the amount of 0 to 5% (by weight paint) 0.2 ~ 0.4 mm diameter nozzle discharge pressure 15 ~ 20 MPa (about 150 ~ 200kg / cm2) air spray:? Dilute the amount of 0 to 1026 (with paint . weight) Nozzle diameter 1.5 ~ 2 Omm discharge pressure of 0.3 ~ 0.4 MPa (about 3 ~ 4kg / cm2) Roller / Brush:? Dilute the amount of 0 to 5% (by weight paint) Cleaner:? X- 6 alkyd thinner (flash point 29 ℃) Note:? This product is only by professional applicators in industrial situations in accordance with the instructions in this manual and on the container. ? Application and use of this product all work must be carried out according to various national health, safety and environmental standards and regulations related. ? If there is doubt about the suitability of this product, please consult the details of our technical service department. Packaging: 18. 5L barrel 20kg storage and transportation: 1. This product is at a temperature of 25 ℃ effective storage period for a period of 12 months, extended by the inspection qualification can still be used. 2. The product should be stored ventilated, dry, to prevent direct sunlight and away from heat sources. 3. When this product transportation, should prevent rain, sunlight, and should meet the requirements of the transport sector.